Saturday, May 19, 2012

Pentek DGD-7525 Spun Polypropylene Filter Cartridge, 10" x 4-1/2"

Pentek DGD-7525 Spun Polypropylene Filter Cartridge, 10" x 4-1/2"

Shock Sale Pentek DGD-7525 Spun Polypropylene Filter Cartridge, 10You looking to find the "Pentek DGD-7525 Spun Polypropylene Filter Cartridge, 10" x 4-1/2"" Good news! You can purchase Pentek DGD-7525 Spun Polypropylene Filter Cartridge, 10" x 4-1/2" with secure price and compare to view update price on this product. And deals on this product is available only for limited time.

Pentek DGD-7525 Spun Polypropylene Filter Cartridge, 10

Price: $13.88 $11.99   Updated Price for Pentek DGD-7525 Spun Polypropylene Filter Cartridge, 10
Purchase Pentek DGD-7525 Spun Polypropylene Filter Cartridge, 10

Product Feature

  • Reduces sand, silt, scale, and rust particles in residential, commercial, and municipal drinking water
  • Combines two separate gradient layers for higher efficiency and dirt-loading capacity
  • Spun polypropylene for resistance to chemicals and bacteria
  • Initial pressure drop of less than 1 psi at a flow rate of 10 gpm
  • Temperature range of 40 to 145 degrees F (4.4 to 62.8 degrees C).

Product Description

This Pentek DGD-7525 spun polypropylene filter cartridge reduces sand, silt, scale, and rust particles in residential, commercial, and municipal drinking water. It has two separate gradient layers for higher particle reduction efficiency and dirt-loading capacity than standard spun or string-wound cartridges. The nominal filtration rating of the pre-filter layer is 75 microns, and the rating of the post-filter layer is 25 microns. The filter is made of spun polypropylene fibers for resistance to chemicals and bacteria. It has an initial pressure drop of less than 1 pound per square inch (psi) at a flow rate of 10 gallons per minute (gpm), and operates over a temperature range of 40 to 145 degrees F (4.4 to 62.8 degrees C). This spun polypropylene filter cartridge meets National Sanitation Foundation/American National Standards Institute (NSF/ANSI) standard 42 for quality assurance, and is used for treatment of residential, commercial, and municipal drinking water.

Specifications

Nominal filtration rating (pre-filter)75 microns
Nominal filtration rating (post-filter)25 microns
Initial pressure drop at 10 gpm<1 psi
Temperature range40 to 145 degrees F (4.4 to 62.8 degrees C)
Maximum dimensions (H x W)10 x 4-1/2 inches (254 x 114 mm)
Materials certificationNSF/ANSI standard 42

The nominal filtration rating is for a particle removal efficiency of 85%.

H is height, the vertical distance from lowest to highest point; W is width, the horizontal distance from left to right; D is depth, the horizontal distance from front to back.

Water filters remove undesirable particles, chemicals, and microorganisms from water by means of a semipermeable barrier, adsorption, or biological processes. They are made of densely packed synthetic or natural fibers that trap suspended particles, materials that block microbes or adsorb unwanted chemicals, or substances that cause a chemical change, such as acid neutralization. For most residential, commercial, and industrial applications, water filters are manufactured in the form of replaceable cartridges that fit inside permanent housings. Filtration systems typically consist of a series of two or more types of filters, each designed to remove different contaminants. The performance of filters is measured by the minimum particle size that is blocked, the percentage of particles or microorganisms that are removed, the downstream concentration of unwanted chemicals, the maximum flow rate, and the amount of water that can be filtered before the filter must be replaced. Water filters are used in a wide range of applications, including drinking water purification, swimming pools, industrial processes, and irrigation, among others.

Pentair manufactures industrial, commercial, and residential water filtration components and systems. The company, founded in 1966 and headquartered in Minneapolis, MN, meets International Organization for Standardization (ISO) standards 9001 and 14001 for quality assurance.

Pentek DGD-7525 Spun Polypropylene Filter Cartridge, 10" x 4-1/2" Review

Was a perfect replacement for my house's water filter and quite easy to install as well! Thanks for offering this product on-line through Amazon because it would have been a nightmare to find it in stores, IMHO.

Most of the consumer Reviews tell that the "Pentek DGD-7525 Spun Polypropylene Filter Cartridge, 10" x 4-1/2"" are high quality item. You can read each testimony from consumers to find out cons and pros from Pentek DGD-7525 Spun Polypropylene Filter Cartridge, 10" x 4-1/2" ...

Buy Pentek DGD-7525 Spun Polypropylene Filter Cartridge, 10

No comments:

Post a Comment