Aquarium II - 7 Stage RO/DI Water Filtration System (100 GPD)

You looking to find the "Aquarium II - 7 Stage RO/DI Water Filtration System (100 GPD)" Good news! You can purchase Aquarium II - 7 Stage RO/DI Water Filtration System (100 GPD) with secure price and compare to view update price on this product. And deals on this product is available only for limited time.

Price: $149.99    

Product Feature

• Provides 0ppm water using 7 stages of water purification for the purest water.
• Production capacity of up to 100 gallons per day.
• 3 Stages of DI resin to ensure only the purest water reaches your aquarium.
• Perfect for both fresh and saltwater aquariums.
• No more need to purchase chemicals or carry home water from your local fish store.

Product Description

The Aquarium II System comes with everything you will need to fully install your system and produce 1000+ Gallons of ultra pure drinking water for your Aquarium Environment before ever needing to change the pre and post filters of your system.Filter Stages Included:• First stage:(SED; 5 Micron Sedimentary Filter)• Second Stage:(GAC; 5 Micron Granular Activated Carbon for Chemicals)• Third Stage:(CCB; 1 Micron Coconut Carbon Block For Chemicals)• Fourth Stage:(100 GPD Reverse Osmosis Membrane - 100% Dow FilmTech Material Membrane)• Fifth Stage: (D.I. Resin Stage (De-Ionization Resin bead Filtration)• Sixth Stage:(D.I. Resin Stage (De-Ionization Resin bead Filtration)• Seventh Stage:(D.I. Resin Stage (De-Ionization Resin bead Filtration)Accessories Included:• Exclusive E-Z Flush Flow Restrictor - gives 100% control of discharge water and the production ratios of your system - extremely convenient• Auto Shut-Off Valve• Wall Mounting Metal Bracket• Source Water Needle Piercing Saddle Clamp• Discharge Drain Water Saddle Clamp• 12 Feet of Blue 1/4'' Tubing• Large & Small Canister Wrenches (For filter change Purposes)• 6 x Canister Mounting Clips• All Elbows and Fittings for complete Installation Purposes

Aquarium II - 7 Stage RO/DI Water Filtration System (100 GPD) Review

Installation of the filter was very easy. All I needed other than the items supplied was some teflon tape. I did however, install a threeway that I purchased at home depot on my water line so that I did not have to use the line piercing tap that is supplied because my water lines have a layer of braided stainless steel on the outside. I installed the filter under my bathroom sink as this filter is for a hydroponic garden and salt water fish tank. Takes around 12-13 hours to fill my 40 gallon fish tank but I have the flow rerstricted producing around 1 gallon for every 4 gallons of waste water. This way there is plenty of water to wash away waste and hopefully prolong the life of the RO filter. Filter produces 0 PPM water at 6.1 PH from my tap water that is normally around 400-500 PPM at well over 7 PH. Very happy with this product and would reccommend it to others. Only issue I had was with the shipping of the product, I was very upset it took over a week for my filter to leave the manufactuerer. However, it arrived only three days after leaving the manufacturer and well within the estimated delivery date.

Most of the consumer Reviews tell that the "Aquarium II - 7 Stage RO/DI Water Filtration System (100 GPD)" are high quality item. You can read each testimony from consumers to find out cons and pros from Aquarium II - 7 Stage RO/DI Water Filtration System (100 GPD) ...