Pentek ChlorPlus 10 Carbon Block Filter Cartridge, 10" x 2-1/2", 1 Micron

You looking to find the "Pentek ChlorPlus 10 Carbon Block Filter Cartridge, 10" x 2-1/2", 1 Micron" Good news! You can purchase Pentek ChlorPlus 10 Carbon Block Filter Cartridge, 10" x 2-1/2", 1 Micron with secure price and compare to view update price on this product. And deals on this product is available only for limited time.

Price: $19.52 $14.60   

Product Feature

• Reduces chlorine and chloramines in residential and commercial drinking water
• Nominal filtration rating of 1 micron
• Bonded PAC media with a polyolefin core and shell
• Initial pressure drop of 6 psi at a flow rate of 1 gpm
• Temperature range of 40 to 125 degrees F (4.4 to 51.7 degrees C)

Product Description

This Pentek ChlorPlus 10 carbon block filter cartridge reduces chlorine and chloramine in residential and commercial drinking water. It has nominal filtration rating of 1 micron at an efficiency of 85%. The cartridge is made of bonded powdered activated carbon (PAC) media with a polyolefin core and shell and polyethylene outer netting. A Santoprene gasket provides a watertight seal. The filter will reduce free available chlorine (FAC) at 2 parts per million (ppm) by at least 75% in up to 50,000 gallons at a flow rate of 1 gallon per minute (gpm), and reduce 3 ppm chloramines by at least 75% in up to 1,000 gallons at a flow rate of 1 gpm. The filter has an initial pressure drop of 6 pounds per square inch (psi) at a recommended flow rate of 1 gpm, and operates over a temperature range of 40 to 125 degrees F (4.4 to 51.7 degrees C). This carbon block filter cartridge is used for treatment of residential and commercial drinking water.

Specifications

Nominal filtration rating	1 micron
Initial pressure drop at 1 gpm	6 psi
Chlorine reduction capacity	50,000 gallons at 1 gpm
Chloramine reduction capacity	1,000 gallons at 1 gpm
Operating temperature range	40 to 125 degrees F (4.4 to 51.7 degrees C)
Maximum dimensions (H x W)	9-3/4 x 2-7/8 inches (248 x 73 mm)

The nominal filtration rating is for a particle removal efficiency of 85%. Chlorine reduction capacity is the minimum total amount of water for which the free available chlorine (FAC) at a concentration of 2 ppm is reduced by at least 75%. Chloramine reduction capacity is the minimum total amount of water for which chloramines at a concentration of 3 ppm are reduced by 75%.

H is height, the vertical distance from lowest to highest point; W is width, the horizontal distance from left to right; D is depth, the horizontal distance from front to back.

Water filters remove undesirable particles, chemicals, and microorganisms from water by means of a semipermeable barrier, adsorption, or biological processes. They are made of densely packed synthetic or natural fibers that trap suspended particles, materials that block microbes or adsorb unwanted chemicals, or substances that cause a chemical change, such as acid neutralization. For most residential, commercial, and industrial applications, water filters are manufactured in the form of replaceable cartridges that fit inside permanent housings. Filtration systems typically consist of a series of two or more types of filters, each designed to remove different contaminants. The performance of filters is measured by the minimum particle size that is blocked, the percentage of particles or microorganisms that are removed, the downstream concentration of unwanted chemicals, the maximum flow rate, and the amount of water that can be filtered before the filter must be replaced. Water filters are used in a wide range of applications, including drinking water purification, swimming pools, industrial processes, and irrigation, among others.

Pentair manufactures industrial, commercial, and residential water filtration components and systems. The company, founded in 1966 and headquartered in Minneapolis, MN, meets International Organization for Standardization (ISO) standards 9001 and 14001 for quality assurance.

Pentek ChlorPlus 10 Carbon Block Filter Cartridge, 10" x 2-1/2", 1 Micron Review

These filters are a bit more expensive but they last longer. The chlorine taste is gone and my last filter lasted almost 3 years and was still working....even though it is recommended to change the filter every 3 months. I don't know what the chloramine levels are after 3 years but there is no chlorine smell and water still tastes clean.

Most of the consumer Reviews tell that the "Pentek ChlorPlus 10 Carbon Block Filter Cartridge, 10" x 2-1/2", 1 Micron" are high quality item. You can read each testimony from consumers to find out cons and pros from Pentek ChlorPlus 10 Carbon Block Filter Cartridge, 10" x 2-1/2", 1 Micron ...