Pentek 150469 3/4" #10 Big Blue Filter Housing

You looking to find the "Pentek 150469 3/4" #10 Big Blue Filter Housing" Good news! You can purchase Pentek 150469 3/4" #10 Big Blue Filter Housing with secure price and compare to view update price on this product. And deals on this product is available only for limited time.

Price: $46.62 $44.49   

Product Feature

• Large filter housing for high-flow and heavy sediment applications
• Reinforced polypropylene sump for strength and chemical resistance
• Use with a 10" x 4-1/2" filter cartridge (sold separately)
• Pressure relief button for easier cartridge replacement
• Initial pressure drop of 2 psi at a flow rate of 15 gpm

Product Description

This Pentek 150469 3/4” #10 Big Blue filter housing with pressure relief is suitable for high-flow and heavy sediment applications. The opaque blue sump is made of reinforced polypropylene for strength and resistance to chemicals, and the black cap is made of high-flow polypropylene (HFPP) for stiffness. The black cap has 3/4” female National Pipe Thread Taper (NPT) threaded input and output connections and a nitrile butadiene rubber (Buna-N) O-ring to ensure a watertight seal. A pressure relief button on the inlet side of the cap releases pressure in the housing for changing filter cartridges. The housing can be used with a 10” x 4-1/2” filter cartridge (sold separately). It has an initial pressure drop of 2 pounds per square inch (psi) at a flow rate of 15 gallons per minute (gpm), a maximum operating pressure of 100 psi, and a maximum operating temperature of 100 degrees F (37.8 degrees C). This filter housing meets National Sanitation Foundation/American National Standards Institute (NSF/ANSI) standard 42 for quality assurance, and is for use in various high-flow applications, including residential drinking water filtration, food service, and irrigation, among others.

Specifications

Filter cartridge size (H x W) (sold separately)	10 x 4-1/2 inches (254 x 114 mm)
Initial pressure drop at 15 gpm	2 psi
Maximum temperature	100 degrees F (37.8 degrees C)
Maximum pressure	100 psi
Maximum dimensions (H x W)	13-1/8 x 7-1/4 inches (333 x 184 mm)
Materials and structural integrity certification	NSF/ANSI standard 42

H is height, the vertical distance from lowest to highest point; W is width, the horizontal distance from left to right; D is depth, the horizontal distance from front to back.

Water filters remove undesirable particles, chemicals, and microorganisms from water by means of a semipermeable barrier, adsorption, or biological processes. They are made of densely packed synthetic or natural fibers that trap suspended particles, materials that block microbes or adsorb unwanted chemicals, or substances that cause a chemical change, such as acid neutralization. For most residential, commercial, and industrial applications, water filters are manufactured in the form of replaceable cartridges that fit inside permanent housings. Filtration systems typically consist of a series of two or more types of filters, each designed to remove different contaminants. The performance of filters is measured by the minimum particle size that is blocked, the percentage of particles or microorganisms that are removed, the downstream concentration of unwanted chemicals, the maximum flow rate, and the amount of water that can be filtered before the filter must be replaced. Water filters are used in a wide range of applications, including drinking water purification, swimming pools, industrial processes, and irrigation, among others.

Pentair manufactures industrial, commercial, and residential water filtration components and systems. The company, founded in 1966 and headquartered in Minneapolis, MN, meets International Organization for Standardization (ISO) standards 9001 and 14001 for quality assurance.

Pentek 150469 3/4" #10 Big Blue Filter Housing Review

This housing seems very heft and seems very durable. It is also quite heavy, so I thought it was a good idea to get the mounting bracket to screw it to the wall. I was a little afraid to hang it from my pipes only.

There are holes up top for a mounting bracket, but this is something extra you need to buy. When I bought my bracket it came with all the screws I needed to put it on this housing and screw it to the wall.

There is no filter that comes with this either. This is fine, and I expected it, but just wanted to let you know. I used a DGD-5005 filter. These are great, and are a 50 micron and 5 micron filter, so it is just like putting 2 filters in with this one housing.

I also found it wasn't a bad idea to get a SW-3 wrench to open up this housing. It is a plastic handle that makes it a lot easier to unscrew the filter to change it. My advice is DON'T TIGHTEN THE FILTER UP WITH THE FILTER WRENCH. It was VERY hard to open the filter again later and change it when I tightened it with the wrench. Only use the wrench to open it, not tighten it.

Overall a great product, does its just, and I think it should keep lasting me a long time.

Most of the consumer Reviews tell that the "Pentek 150469 3/4" #10 Big Blue Filter Housing" are high quality item. You can read each testimony from consumers to find out cons and pros from Pentek 150469 3/4" #10 Big Blue Filter Housing ...