Set of 2 PF-4 Fluoride Replacement Filters for Berkey Ceramic Filters
You looking to find the "Set of 2 PF-4 Fluoride Replacement Filters for Berkey Ceramic Filters" Good news! You can purchase Set of 2 PF-4 Fluoride Replacement Filters for Berkey Ceramic Filters with secure price and compare to view update price on this product. And deals on this product is available only for limited time.Price:
Product Feature
- Set of 2 Berkey PF-4 Replacement water filters. Reduces fluoride, arsenic, MTBE, Lead
- For use with gravity filter systems that use ceramic filters
- Will fit on British Berkefeld and Doulton ceramic filters
- Used as a post filter, these screw onto the bottom of your ceramic filters
- Will NOT fit Black Berkey filters. Only fits white ceramic filters.
Product Description
Designed to be used as a post filter to remove or reduce fluoride, lead, arsenic, and MTBE. These are used in conjunction with ceramic filters, and screw onto the bottom threads. For use with gravity filter systems such as the Big Berkey and British Berkefeld systems that use white ceramic filters. Not for use with Black Berkey filters. Technical Specifications: MTBE: The PF-4 is manufactured to exceed ANSI/NSF Standard 53 which requires that MTBE be reduced by at least two thirds from an influent rate (water going in) of 15ppb to an effluent rate (water going out) of less than 5ppb (> 95% reduction*). LEAD: Tests have shown that when 2000 gallon (7,600 liters) of influent water at a concentration of lead of 200 ppb pass through 200 grams of media at a flow rate of 1 gpm (3.8 lpm), the lead level was reduced to less than 1ppb (>99% reduction). FLUORIDE: Testing for fluoride was based on 20-30ppm of the ion in the influent aqueous solution at a flow rate of no more than 3 gpm (11 lpm) per cubic foot of media. Results of < 1ppm of the fluoride ion in the effluent were typical for the media (>95% reduction). Under optimum conditions, effluent concentrations of less than 50 ppb were readily achieved (>99.75% reduction). REPLACEMENT: Under normal conditions it is recommended that PF-4 elements be replaced at six-month intervals (Actual capacity is dependent on the presence of other competing contaminants in the source water. High levels of total organic carbons, volatile organic compounds or certain inorganic minerals may reduce the capacity and efficiency of these elements.)Set of 2 PF-4 Fluoride Replacement Filters for Berkey Ceramic Filters Review
PF-2's are useless PVC placebos so chances are these are just the same.I wanted these fluoride filters to work, I really did.
After running 15 gallons of city tap water (with an average ppm fluoride content of 0.30 to 0.60) through 2 x Berkey black filters and 2 x PF-2 fluoride filters I sent this sample of "filtered" water to 3M Industries for a fluoride concentration test. The results confirmed that these so-called "fluoride filters" DON'T actually filter out very much fluoride at all, if any.
3M Lab Result: 0.36 ppm of FLUORIDE (remaining in the water filtered through these PF-2 "fluoride" filters).
"The fluoride concentration result for the sample you submitted is listed above. This result was obtained using state-of-the-art equipment for accuracy. The method of testing is the fluoride ion selective electrode." (3M)
So if you just want to KEEP the fluoride in your "fluoride filtered" drinking water while adding some PVC leach-age with a sprinkling of aluminium into your drink, go ahead and blow some $$ on this rubbish.
Alternatively you could go and buy some plastic pipe fittings from the local hardware store, throw in some aluminum shavings and hang those in the "filtered" water chamber of your Berkey - for a mere fraction of the cost.
Most of the consumer Reviews tell that the "Set of 2 PF-4 Fluoride Replacement Filters for Berkey Ceramic Filters" are high quality item. You can read each testimony from consumers to find out cons and pros from Set of 2 PF-4 Fluoride Replacement Filters for Berkey Ceramic Filters ...